Best Portable and Rolling Tool Boxes – Stunning Reviews
When selecting a toolbox, the intended use is arguably the most important factor.
A mechanic will not need the same toolbox that an electrician does, and a general contractor will require an altogether separate toolbox than either of the first two. Still, one thing that most toolboxes need is the option of portability.
Because a job, whether professional or at home, often requires you to move around, the portability of a toolbox is not only convenient but often vital. However, with all of the specialized fields out there, it can be difficult to determine which one is right for you.
That is why we have put together a list of the ten best portable tool boxes drawn from different fields. Then we provide a thorough buyer’s guide so you can figure out which product will suit your needs.
Stanley 020800R FatMax – Best Portable Rolling Workstation Toolbox
Stanley is known as one of the more reliable manufacturers of hand tools. In fact, their steel measuring tape is arguably the standard by which all other measuring tapes are compared.
However, Stanley has a bit of a more spotty reputation when it comes to tool containment.
That is due in large part because most Stanley toolboxes use a molded foam material for their housing.
While this foam is incredibly resistant to water and extremely lightweight, it is not the most durable material you could use. Granted, the structural foam is stronger than most types of plastic, but even a decent resin is stronger and similarly weighted.
As such, this workstation is often as much of an inconvenience as it is a convenience. For one, the seven inch wheels are a decent height, but even they cannot handle the bowing from a fully laden FatMax. Moreover, the plastic cantilever strut will suffer its own durability issues after repeated use.
- A fairly inexpensive workstation toolbox
- Organization options are abundant
- Offers a large amount of storage
- The latches are not durable at all
- The handle will likely eventually come free from the sleeve
- The wheels cannot handle heavier loads
Stanley 028001L 28-Inch – Largest Hand Toolbox
Following up the FatMax, the next Stanley toolbox is far more conventional in design and intended use.
Unfortunately, this device is also made out of the same structural foam that the FatMax uses. This means that when laden with heavy tools, this toolbox will potentially fail along with a number of structural points.
For one, whatever bowing the FatMax may have suffered will only be amplified by this product. In fact, if you put too many heavy tools in this Stanley, the top will strain against its latches.
Thankfully the latches are made out of metal, so they generally will not fail on their own. However, it is far more likely that the handle or latches will simply separate from the foam mold altogether over time and extended abuse.
Still, this is one of the largest hand toolboxes available. While its rectangular shape could pose balance issues, it offers sides that are molded into handholds. This may cut some of its total carrying capacity a bit, it does make carrying a heavy toolbox easier and safer.
- Different carrying methods make it more portable
- A water tight seal ensures you tools stay dry
- A fairly large hand toolbox
- The plastic construction does not handle heavy loads well
- The tray is small and does not sit flush inside the box
Stalwart Oversized Portable – Best Portable Roolbox on Wheels
Stalwart is a relatively unknown brand, likely due to originating in Canada–a country that, unlike Germany, Japan, or the United State, is not really known for manufacturing tools.
Moreover, Stalwart does not actually specialize in anything and instead offers a little bit of everything from pet supplies to camping supplies to automotive parts.
That being said, the brand did produce a decent, if not great, workstation toolbox. Unlike most other workstations, the Stalwart actually blends the use of steel and plastic so that it is both fairly durable while remaining relatively lightweight.
Unfortunately, the wheels are not that large which can create a dragging effect when it is heavily laden.
Still, this workstation does a number of things right. For instance, unlike most other workstations, the top two compartments can actually be separated from the main frame and used individually. This essentially provides you three full toolboxes for the price of one.
- Provides a wealth of organizations options
- Can easily be converted into individual toolboxes
- Provides an excellent amount of storage space
- Is an exceedingly expensive toolbox
- The bottom compartment is more convenient than effective
- The wheels and handles are not durable
Excel TB133A-Red 21-Inch – Best Portable Mechanic’s Tool box
The Excel TB133A is the first toolbox on our list to feature a full suite of the conventional tool cabinet drawers.
However, it is much smaller than a traditional tool cabinet and comes with a handle to aid in portability.
Granted, its design combined with its weight will carry some of the balance issues larger toolboxes can have, but this is about as good as it gets when it comes to a portable mechanic’s toolbox.
Unfortunately, this means that the product does not necessarily feature some of the design preferences on would like to see. For instance, the draws do not feature a rolling or ball bearing design. Instead, they simply slide in or out along a metal track. This can make opening the drawers a bit difficult–especially if you do not keep them clean and oiled.
Moreover, while this toolbox offers both an external and the less common internal locking mechanism to ensure nothing spills out, the internal lock is liable to lock in place and not open when prompted. This can leave you struggling to open the toolbox until the internal lock comes undone.
- Made from steel and aluminum
- Provides four separate levels for easy organization
- Provides two different types of locking methods
- Does not have the clearance for larger tools
- The drawers can be difficult to open
- The locks can be a bit finicky at times
Excel TB122B – One of the Best Cantilever Toolbox
This is the only cantilever toolbox we reviewed, and while it does offer a few attractive features, it is by no means the best cantilever toolbox on the market.
That being said, it does provide an adequate amount of space at a relatively reasonable price for a cantilever toolbox. Of course, that comparison goes out the window when you compare it to a hinge mobile toolbox.
First, this product follows the Excel standard by using steel over plastic. However, unlike the mechanic’s toolbox, the cantilever toolbox does not make use of aluminum. As such, the Excel TB122B is far heavier than even many that are larger and it certainly more than any other device we reviewed – a hefty twelve pounds.
Still, the shelves and main compartment do offer a decent size, providing you plenty of room to store an assortment of hand tools.
Unfortunately, the shelves do not have dividers built into them nor can any be added later. This means that the shelves are not ideal for storing fasteners or other small parts–which is generally one of the selling points of a cantilever toolbox in the first place.
- Cantilever style keeps everything organized
- Steel construction is more durable than plastic
- The drawers and main compartment are sized appropriately
- Is a fairly small portable product
- The shelves do not have any dividers
- Various hinge rivets are not the best quality
Stanley 023001W 23-Inch – Best Portable Tool Box for Homeowner
Stanley toolboxes often make the mistake of trying to be all things to all buyers. Rather than manufacturing specialized toolboxes for different markets, they end up truly satisfying few.
However, one of those few markets that get everything they need is the homeowner.
This box is relatively large for a hand toolbox, but not so large that its size makes it awkward to carry.
Moreover, the structural foam that Stanley uses is minimized in this model due to it not being able to house quite as many heavy tools. In this regard, the hand tools used by a homeowner for general maintenance are not quite enough not cause the dreaded bowing this brand is known for among professionals.
Unfortunately, the tray inside this toolbox is only three quarters, which means that unless you fill it up evenly or entirely it is liable to spill its contents onto the main compartment. However, a homeowner is less likely to truly need to make use of this feature.
- Is a decently sized portable tool box
- Offers a watertight seal to protect tools inside
- Is a surprisingly light product given its size
- It is a somewhat expensive option
- The plastic construction does not handle heavy loads well
- The three quarter try may spill inside
Excel TB109-Black 14-Inch – Most Portable Tool box
Excel does not have the name recognition that Stanley may, but the brand has made a name for itself over the last decade or so by manufacturing a wide number of hardware containment options for OEM and ODM customers.
As such, Excel’s products must be made to withstand the expected rigors of a professional jobsite.
In this regard, the fourteen inch toolbox performs admirably if not perfectly. The Excel TB109 is constructed from cold rolled steel, making more durable than plastic or structural foam. Moreover, the powder coat finish helps protect the steel from water or other chemicals.
This particular toolbox is exceptionally small compared to most. As such, it is easily the most portable being both exceedingly lightweight as well fairly well balanced. Of course, you will not be able to haul around a wide variety of large hand tools and virtually no power tools. However, this is an excellent portable tool box for around the house.
- The steel construction is better than plastic
- Lightweight and exceptionally portable
- Is an inexpensive option
- Is an exceedingly small toolbox
- The handle rivets are not that durable
- The piano hinge is flimsy and will not open beyond 90 degrees
Excel TB102-Red 16-Inch – Best Small Space Portable Tool box
While not exactly the smallest toolbox we reviewed, this sixteen-inch Excel is fairly close. However, that additional storage is about right when you need to fit into a tight space.
Anyone who regularly finds their self in a crawlspace or under the frame of a house will appreciate the compact size of this product that is also large enough to carry more than a couple of hand tools.
Like the other Excel toolboxes, this model is made from cold rolled steel, making it more durable than plastic or structural foam. The steel is then layered with a powder coat to help prevent rusting from water or corrosion from other chemicals.
Thankfully, its small profile prevents the steel from weighing too much as this toolbox comes in at just over two and a half pounds.
Unfortunately, the connecting parts of the toolbox do not share the same durability as the body.
The rivets that hold the handle in place are not all that sturdy which means you have to be a bit gentler with this toolbox than some others. Moreover, the piano hinge is not that durable and only opens to ninety degrees.
- The steel construction is better than plastic
- Lightweight and exceptionally portable
- Is an inexpensive mobile toolbox
- Is an incredibly small product
- The handle rivets are not that durable
- The piano hinge is flimsy and will not open beyond 90 degrees
VonHaus Very Small Utility Tool Storage Box – Best Fastener Toolbox with Drawers
VonHaus is definitely not a well-known brand in the tool market, though it does not position itself to be. Instead, the brand is designed to appeal more to the homeowner than the professional.
While this may hold true for their tools, they make a surprisingly capable storage unit for fasteners and other small components.
It all begins with the VonHaus toolbox design. This device blends the design of drawers with organizers. This creates a toolbox that can not only store a large number of fasteners and assorted bits but do so more conveniently than most competitors.
Moreover, these organizers can both be removed individually as well as customized with arrangeable dividers.
However, this is not at all a toolbox actually designed to house tool except for fairly small ones. Granted, since it specializes more in fasteners than anything else, a few wrenches and screwdrivers should be all you need with this arrangement.
- Provides numerous options for organization
- Each drawer can be taken out individually
- The dividers can be rearranged for different needs
- The plastic construction is not as durable as preferred
- Not suitable for carrying even larger hand tools
- The locks and handles are not that durable
Cat Premium Plastic Portable Toolbox – Best for Electrician’s
Cat tool storage is one of the offshoots from the Caterpillar brand of industrial vehicles, tools, and equipment.
Because of this background and a history stretching back eighty-five years, you would expect this product to be top of the line, ready for an industrial setting.
Unfortunately, that is not the case as the Cat toolbox is more similar to a Stanley than Caterpiller.
For one, the Cat Premium uses plastic–and not the structural foam of Stanley, just plain plastic. This creates some of the same issues where the toolbox will bow when heavily laden with tools.
However, unlike the structural plastic, this tool organizer is more likely than a Stanley to have the hinges and handle separate from the frame rendering the toolbox useless.
However, electricians generally do not need to carry the same kind of load as a general contractor. That is why the fastener components located at the top of the toolbox as well as the tray inside make this a convenient toolbox for that profession to use. This is especially relevant considering many of those tools are actually meters which are not as heavy as metal hand tools.
- Is a fairly large product
- Comes with removable fastener compartments
- The internal tray is large and sits flush
- Does not handle heavy loads all that well
- The plastic construction is not that durable
- The hinges and handle are not that durable
Best Portable & Rolling Tool Box – Buyer’s Guide
While toolboxes as a broad category come in a wide variety of forms, the portable type of toolboxes generally come in one of two profiles: hand boxes and workstations. Both of these profiles are technically portable, though they are often used for very different purposes. Moreover, even products within the same profile will demonstrate different design features to accommodate the needs of various professions or jobs.
Hand Toolbox – This is the most common type that comes to mind when people say the word “toolbox.” These products are generally anywhere from one to three feet in length. Their height and depth can vary, but both dimensions rarely exceed more than one foot. What often distinguishes one hand toolbox from the next is the way that it opens. The three different types of products are generally hinge, piano hinge, and cantilever.
A hinge toolbox will generally have two or three hinge points that allow the toolbox lid to open 180 degrees. While this style may be the most convenient for quickly retrieving tools, it is also the least durable type of opening.
A piano hinge is similar to a basic hinge except for the hinge threads the entire side of the opening. While this provides significantly more durability, it also often limits the degree to which the lid can open.
Finally, cantilever hand toolboxes are an altogether unique type of opening. Rather than opening along a single edge, cantilever boxes open from the middle and glide along with rivets set into struts that slide more than a hinge.
This type of toolbox has the benefit of being able to contain numerous shelves that automatically unfurl as you open the device. Unfortunately, this type is also prone to a smaller main compartment, making it suitable only for hand tools or a single power drill.
Workstation – Were it not for the wheels, workstations would not actually be portable toolboxes at all. In fact, a workstation is far more similar to a large tool chest or tool cabinet than it is to a toolbox. However, its purpose generally far exceeds what you would expect from a standard one.
Quite often a workstation is used for professional jobsite where the workers share tools owned by the contractor. In this instance, the workstation allows you to carry pretty much every basic hand and power tool you might need for a given job.
This is where the wheels come in handy because all of those tools would otherwise be prohibitively heavy to carry in a single container. Moreover, the workstation is often so large that even if it were not heavily laden with a variety of heavy tools, it would be too bulky to move from place to place.
Generally, a workstation will have at least three main compartments with numerous other smaller compartments scattered throughout.
The material your toolbox is made out of will determine a fair number of qualities about the product. One of the most important qualities the material will influence is its durability. While the more structurally sound material is inherently more durable, it also poses some specific issues when also balancing against portability.
Specifically, the most durable materials are also the heaviest, making the most durable product of equal size to a less durable one also less portable.
Plastic – This is the least durable material used for toolboxes. Depending on the thickness of the plastic, a heavily laden toolbox will bend and warp when carried. If the plastic box is allowed to remain with this load over a long period of time, it is liable to develop a permanent deformation that will decrease its structural integrity and make it more difficult to close and use.
However, plastic is also the cheapest and the lightest material, so a smaller plastic toolbox designed to carry a few small tools may be more convenient than a similarly sized metal counterpart.
Aluminum – Pure aluminum is fairly weak, but most of the products made with aluminum actually use an aluminum alloy that includes significant amounts of iron. While pure aluminum is exceptionally light, aluminum alloy is less so. Still, the alloys will be lighter than many other metals used while still providing a decent amount of durability.
Unlike plastic, aluminum is more liable to dent that crack or break, allowing a damaged aluminum toolbox to maintain its function after suffering minor damage generally. Unfortunately, aluminum alloys are also more expensive than plastic and often more expensive than other metals used for the appliance.
Steel – Steel is the most common metal used for the tool organizers. It is reasonably strong, which increases the toolbox’s durability, and dents like aluminum rather than cracking or breaking like plastic. Moreover, steel is fairly inexpensive.
In fact, steel is generally on par with plastic in terms of cost and significantly less expensive than aluminum alloys. However, steel is also one of the heaviest materials commonly used for toolboxes, which makes them far less portable unless smaller in profile.
Most toolboxes will have one large main compartment. Some options may only have one large main compartment. However, most jobs that require tools often include a wide range of tools that will need to be used–tools that come in a variety of shapes and sizes.
This is why most choices on the market that are larger than a foot and a half or more will often contain some form of an additional compartment. These compartments allow you to keep different sized tools and tool accessories separated from one another so that they are easier to find and retrieve when you need them.
Drawers – Drawers have a bit of an odd position as a compartment. On the one hand, drawers are often larger than all the other compartments except the main one. Moreover, drawers are also easier to keep settled than a tray.
However, drawers are generally set directly into the toolbox, unable to be removed or easily transported on their own. Drawers also take up considerably more room than either trays or organizers. As such, drawers are best suited when you anticipate using a large number of different, low-profile hand tools.
Trays – For a hand toolbox, trays are the most common type of additional component. They generally sit at the top of the tool chest, providing an additional layer of protection to ensure the tools in the main compartment stay where they are.
Moreover, trays can be taken out of the toolbox, which allows them and their contents to be transported around a jobsite as necessary without having to lug the entire toolbox with it. Unfortunately, the trays may or may not sit flush in the box, and even if they do, the tray can often slip and slip its contents into the main compartment.
Organizers – Organizers are often an indispensable type of compartment, but they are also exceedingly narrow in what they can carry. Unless the dividers of the organizer can be switched out, the individual sections of an organizer are unlikely to be large enough to hold an actual tool–hand or otherwise.
Instead, organizers are most commonly used to hold fasteners and other assorted parts. Nails, screws, nuts, and bolts are all common items that are found in organizers. However, in this regard, there is no substitute for a solid organizer.
The portability of a toolbox is actually determined by a couple of factors–mostly physical dimensions but some features may come into play as well.
Ultimately, the trick is to find the right balance of factors so that your purchase remains portable without also lacking something of need. In this regard, it is often advised for professionals to sacrifice a bit of portability for overall function, while homeowners likely do not require as functional and can focus more on portability instead.
Weight – Considering a tool box generally holds numerous metal tools and accessories, the weight of the tool organizer itself will greatly influence how portable the toolbox is. This brings us back to the material that the product is made out of and strikes at the crux of the durability vs portability battle. If you plan to carry more than forty pounds of tools and accessories with you, an additional ten pounds or more is a significant weight.
Size – While the size of a toolbox can ultimately influence its weight, one of the primary aspects of their size involves is a balance. The larger a box is in a single direction, the more unbalanced it will be.
Moreover, toolboxes that are a rectangular shape and heavily laden with tools are more liable to bow if you are made out of plastic and have handles break off regardless of their material. Of course, a squarish shaped gadget carries its own issues being bulky in form and awkward to carry by a handle altogether.
Wheels – Wheels are generally reserved for toolboxes that are simply too large to carry by hand. Tool chests and tool cabinets fall into this category, but those tool containers are often limited to a single workshop. Workstations, on the other hand, are designed to both carry a large number of tools and accessories as well as be transported from jobsite to jobsite.
As such, these types of toolboxes require wheels to even function. In this regard, the larger the wheels generally, the easier it is to move the workstation–though wheels over one foot in diameter start to suffer from top heaviness and risk falling over.
What are some of the categories of a toolbox?
Toolboxes come in many forms depending on your needs. There are five main categories depending on the materials used, such as: Plastic, Steel, Aluminum, Waterproof, Cantilever We look at tool boxes according to its portability so that you can use it to move around at your home or work. The small types of toolboxes are referred to as hand boxes. Each kind of toolkit come with its own merits and demerits. For instance, while metal boxes may be cumbersome to move around, they are more durable than plastic.
How do I differentiate a workstation from a hand toolbox?
A workstation is primarily used by professionals to carry their tools while a hand toolbox is mostly used by homeowners for their once in a while repairing needs. You will notice that a workstation has wheels for smooth movement since most workers have to share the tools from one box. While a workstation needs to be large to provide room for lots of tools, a hand chest is relatively small since you don't need lots of equipment for purposes such as car repair in your garage.
What is a cantilever toolbox?
This is a type of hand tool that offers you various shelves for you to store all your tool accessories. Unlike what you are used to, the opening of this toolbox is different. It opens from the glide of its rivets that are designed to slide against one another. This design gives you extra space for storage.
What features should I look for before purchasing?
This depends on why you need the toolbox in the first place. Since the purposes vary, people look for specific features in rolling tool boxes that suit their needs. For instance, a professional would be more concerned about the portability of the toolbox than a homeowner. In both cases, features such as durability and space are essential for choosing the right one.
Can I get a tool box with extra compartments?
Yes. Apart from the regular tool boxes, you may know about; there are those that are designed to give you extra compartments to provide room for additional tools. For instance, Trademark tools 75-4650 stalwart is built with the professional in mind. You can easily separate the top chambers and use them individually to store both small and large sized tools.
How important is the price when purchasing a tool box?
This will depend on why you need it. If you are going to use it for your mechanical needs on a daily basis, you may need to choose a slightly higher priced toolbox than a homeowner. The material of your product also determines the price due to its durability.
Which material is best for my tool box?
If you are considering durability, portable tool boxes made from steel will give you better service than choosing plastic or aluminum. Though your steel box may be a bit heavier than the other two materials, it would be stable and not prone to breaking easily. You might need to spend more on your steel toolbox than going for plastic. We would recommend that you consider a small-sized steel toolbox to reduce the weight if you need it for your home use.
I am a mechanic, which toolbox is suitable for my job?
Choose Excel TB133A. It is solidly built and provides you with additional drawers for both small and large tools. The top compartments could come in handy for your impact wrenches so that you don't strain while at it. The handle is also included for easy movement while an internal lock provides sufficient protection of your tools.
AS we can see, the nuances of use ultimately designate a number of similar and disparate toolboxes as suited for specific purposes. Even a hinge hand toolbox will be best suited for a specific use based on a number of standard qualities like size and weight.
However, workstations are an altogether different beast, best suited for large jobsites with numerous workers. In this regard, the Trademark Tools Stalwart offers not only a solid storage capacity but the convenience of being able to separate its different compartments into individual tool boxes.
For the mechanic, the Excel TB133A offers a steel construction with a full set of drawers and an adequate top compartment for socket wrenches and other commonly used hand tools. For the electrician, the Cat’s plastic construction is less of an issue considering meters are weighed less than tools, while the full tray and fastener organizers keep everything needed in one place.